The Definitive Guide to Choosing the Best Router for Your Needs

The Definitive Guide to Choosing the Best Router for Your Needs

0 Comments

How to Choose the Best Router for Your Needs

 

 

Remember back in the late 1980s and the 1990s when anyone who wanted to access the internet had to play the waiting game while listening to that awful screeching sound of the modem dialing the ISP? Ah, the nostalgia of good old dial-up! Thankfully, companies like Cisco make it so we no longer have to deal with the slow connection and loading speeds.

dial up internet router

 

The speeds and capabilities of the internet have grown exponentially since the development of the wireless internet. All of the hardware involved from modems, routers, and processors have managed to outgrow each other year over year. In fact, in April 2015, Linksys (owned by Cisco) announced that they had achieved over 100 million units in router sales. That’s a lot of routers, but how do you know which one is right or you?

When it comes to choosing a Cisco router, there are many tools available to help you make the best decision. The manner in which you go about choosing switches is very comparable.

Go with Your Gut

When you think of Cisco routers, what is the first thing that comes to mind? It might be Cisco’s 2600 and 3600 series lines. For years, these lines of routers served as the ideal model for midsize business’ networks. Even though Cisco discontinued both lines, some organizations still use them today.

Going with your gut is just one way to choose a router for a current network. However, this method does have a major downside. Choosing a discontinued product could mean that your business misses out on a lot of the features in newer models.

Do Some Research

Most of us were forced to do homework for almost 20 years of our lives. So, what’s a little more? When choosing a router for a new network, the same old routers can’t always be counted on. Do your homework and evaluate different criteria and features that are offered in different models. The shortlist below can help you with the right questions.

Performance

Try looking at how many packets per second the router can forward. For instance, a Cisco 2610 or 2612 series router can forward an approximate 15,000 packets per second. Cisco 7500 series routers can forward an approximate 2 million packets per second. However, those numbers have a tendency to be altered once features such as firewalls and VoIP are added.

Growth

Growth implies the number of interfaces that can be supported by the router. Routers typically have a preset number of interfaces (WAN or LAN). Some routers, like the 3600 series, for instance, have no interfaces. So, take note of the number of interfaces that can be added to the default.

Software

Depending on your current set up, the router you chose might need to support a certain interface or a VoIP feature.

Services

Services refer to the integrated services supported by the router. Today’s routers support features that once needed separate boxes to function. A great example is a 32-port switching module that cancels out the need for an Ethernet switch. Also having a firewall, VPN server, and an IDS/IPS built into the router can cancel the need to have each individual feature as a separate box.

Redundancy

Does the router offer the necessary redundancy for working at a critical point in the network? Some redundancy examples include hot-swappable power supplies or high-availability routing protocols such as HSRP or VRRP.

Support

Cisco routers have a reputation for being very reliable products. Furthermore, Cisco systems usually provide exceptional levels of customer support. When buying the router, many levels of support should be available. Be sure to choose the best level for you and your business.

Ask the Pros

When it comes to choosing a router, Cisco offers a Product Advisor, which virtually makes the router decision for you. As a bonus, you don’t need to be a registered Cisco user to access this amazingly helpful tool.

The Cisco Product Advisor is a simple, time-saving tool that assists in choosing the right Cisco router for your network. It asks the questions and suggests a product based on your answers. So you can sit back, relax, and continue to surf… the internet that is.

 

WBU ciisco logo

Selecting the Best Server for Your Data Center

0 Comments
server

Server Selection

In order to improve bottom line performance in the workplace, IT professionals should assess top priorities to establish protocol on how to choose a server while constructing the most efficient workloads.

Some may say that servers are the heart and lungs of the modern internet, but the deliberation on how to select a server can every so often create a confusing range of hardware choices. Even though it’s possible to pack a data center with matching, virtualized and bundled systems that have the ability to handle any job, the cloud is forever altering how businesses run applications. As more organizations move workloads in the public cloud, local data centers need less resources to host the workloads that remain on site. This is encouraging IT administrators and business professionals to pursue more value and performance from the dwindling server fleet.

These days, the infinity of computer hardware systems is being tested by a new trend in customization with server attributes. Some businesses are encountering the idea that one size may in fact fit all in regards to servers. However, you can opt for and even design server cluster hardware to accommodate specific usage categories.

server selection

Figure from: http://searchdatacenter.techtarget.com/tip/How-to-choose-a-server-based-on-your-data-centers-needs

VM Merger and Network I/O

An advantage of server virtualization is the capacity to host several virtual machines on the same physical server in order to use more of a server’s existing resources. VMs largely depend on RAM and processor cores. It’s impractical to decide exactly how many VMs can exist on any given server because you can arrange them in a way that they can use an extensive range of memory space and processor cores. However, selecting a server with more memory and processor cores will usually permit more VMs to exist on the same server, improving consolidation.

For instance, a Dell EMC PowerEdge R940 rack server can host up to 28 processor cores and offers 48 DDR4 DIMM slots that support up to 6 TB of memory. Some system administrators may choose to pass on individual rack servers with a preference of blade servers for another form factor or as part of hyper-converged infrastructure. Servers meant for high levels of VM merger should also contain resiliency server features.

Another thing to consider when choosing a server for consolidation reasons is the extra attention to network I/O. Enterprise workloads regularly exchange data, access centralized storage resources, and interface with users across the LAN or WAN. Server merging can take advantage of a fast network interface, such as a 10 Gigabit Ethernet port.

Visualization and Scientific Computing

Graphics processing units (GPUs) are surfacing at the server level more and more to help with statistically intensive tasks from big data processing and scientific computing to modeling and visualization. GPUs also allow IT to retain and procedure sensitive, valuable data sets in a more secure data center rather than let that data flow to business endpoints.

GPUs need more than an extra GPU card in the server since there is a slight effect on the server’s traditional processor, memory, I/O, storage, networking or other hardware. The GPU adapters contained in enterprise-class servers are usually far more advanced than the GPU adapters offered for desktops. Graphics processing units are progressively more available as highly specific modules for blade systems.

Take HPE’s ProLiant Graphics Server Blade for instance. The graphics system flaunts support for up to 48 GPUs through the use of multiple graphics server blades. The huge volume of supported GPU hardware gives several users and workloads the ability to share the graphics subsystem.

Info from: http://searchdatacenter.techtarget.com/tip/How-to-choose-a-server-based-on-your-data-centers-needs

Data Storage Faceoff: Tape vs Disk vs Cloud

0 Comments
face off

Data Storage Faceoff: Tape vs Disk vs Cloud

In September 2010, Virgin Blue airline’s check-in and online booking systems went down for a period of 11 days, affecting around 50,000 passengers and 400 flights. Ultimately the downtime ended up costing the company over $20 million. So, what is the true cost of downtime you ask? Studies have shown that cost of partial data storage backup outages cost an average of $5600 per minute or $300 thousand dollars per hour! Depending on the industry, any single downtime can run into the millions of dollars of lost revenue. Just ask Virgin Blue.

Most businesses have (or should have) plans in place for emergency outages. Data backup procedures are a critical part of these emergency downtime plans. However, as the number of possible backup options multiplies with the introduction of new technologies it can be difficult to ensure you made the correct data backup decision.

Whether companies are looking to upgrade and retire aging infrastructure or are just preparing for the future, an assessment of options is needed. Welcome to the data storage face off- tape vs. disk vs. cloud backup.

Data Tape Storage Backuptape data storage

Back in the 1960s and 1970s, tape was the main way to store any backup data. Since then, it has evolved and grown with changes in technology and growing infrastructures for more than forty years. By deciding to implement or continue using tape will leave your organization with very few infrastructure improvements.

Tape is also the most affordable data storage option due to minimal infrastructure enhancements and the cost of tape itself. Usually, tape is an inexpensive alternative to both disk and cloud storage options; however, its dependent on the total amount and type of data your organization backs up.

Another major benefit of using tape as a main data storage method is the ability to take advantage multi-site storage. As with any organization’s emergency downtime initiative, it is ideal to ensure multi-site data storage. That way a disaster at one storage site doesn’t risk destroying all of the company’s proprietary data. Nevertheless, the multi-site tape storage method can be pricey once you factor in costs of secure tape transfer and storage in data centers at off site facilities. Although tapes have certainly been in existence the longest, like everything else they’re bound to evolve.

Hard Disk Storage Backuphard disk data storage

Disk-based backup such as hard drives, is vastly quicker and more consistent for data repair than tape backup. Instead of writing from disk to a tape, writing from a disk to a disk is purely a more effective method of data transfer.

In the same way, restoration from disk based storage is a fairly efficient process. Restoration allows the avoidance of retrieving, sequencing and then replicating tapes one at a time.

The biggest downside to disk-based storage backups is that they’re located in an on-site facility. For multi-location storage, a third-party is needed for off-site backup. If you don’t want to use an off-site storage provider, it can become extremely expensive to keep increasing disk space.

Cloud Storage Backupcloud data storage

Cloud-based backup refers to an online off-site back up through cloud enablement technologies. Organizations can typically store data with superior cost efficiency in a cloud, by eliminating the need to buy and refresh tapes or disks. Cloud backup is also a much less painstaking process, as data replication is done as a service.

Cloud backup normally consist of multi-site data storage. A local data copy can live in an on-site appliance like the SmartFrame, while it also replicates data to your off-site data storage provider. These applications and enablement technologies constantly run in the background of your IT processes, removing some manual IT processes.

Since cloud based back up is still a relatively new technology, there are some perceived security concerns around the cloud. Questions remain whether cloud backup will open their data to being hacked or even leaked from a third party. There are also concerns of accidental mixing of data with other customers existing in the same data center.

Decision Time

No matter which data backup method an organization chooses to implement, it will have its fair share of both benefits and drawbacks due to technology continuing to make advances in speed, efficiency and security. When the time is right for your business to install a data storage infrastructure or upgrade the infrastructure currently in place, let We Buy Used Tape do the work for you. Since 1965, We Buy Used Tape has been assisting IT professionals and their companies efficiently update their data back up systems. Used and surplus tape and disk storage can be repurposed; helping businesses increase initial return on investment while staying socially responsible. Contact one of our IT experts today for a hassle-free quote on your IT assets. Let us take care of your infrastructure update and security from start to finish.

 

we buy used tape logo

Why Do Electronics Get Outdated So Fast?

0 Comments

Outdated Electronics

Are you tired of buying a new TV, computer, tablet, or phone just to see a bigger, better, faster model a few months later? We all want to stay up to date with the latest and greatest technology, but it seems almost impossible these days.  Our grandparents would buy a major electronic appliance with the expectation that it would last for many years, but modern electronics seem to get outdated and thrown away every 2-5 years on average. What has caused this shift in lifetime expectancy of our useful gadgets? Simply put: competition, demand, and application.

Competition Among Manufacturersoutdated electronics

The tech industry is full of companies creating considerable demand and even higher levels of competition; forcing products to improve quicker than ever before. Interestingly enough the electronics and IT industries have no dominant brands or concepts. Quite the contrary, there are numbers of very competitive firms challenging one another to increase development of their products; making innovation lightning fast.

Demand Among Consumers

Remember when Apple released the first iPhone 3G, introducing the first true touch screen and home button combination? Shortly thereafter, Samsung released their version of a touchscreen phone with the Instinct model, dubbed the “iPhone killer”. Obviously, it didn’t live up to its name but it definitely started a trend of who can do what better. Now every company is competing including Google. The demand for sleeker, faster, and more innovative products is so significant that invest  ments in the tech industry stay consistent. Companies are constantly stressing the importance of the creation of new products that help consumers stay ahead of the curve.

Application

Many electronic devices have so many uses and applications in our daily lives that keeping up with the latest versions is almost a necessity. In the past, electronics may have been considered a luxury or strictly for entertainment value, but today’s culture and marketplace have changed that outlook. When was the last time you went one day without checking your email, watching a TV show, or sending a text message? That kind of puts everything into perspective doesn’t it?

Ecurrent electronicslectronics are such a crucial part of our world and will more than likely play a major role in our future. Consider how the internet has produced an unbelievable globalization and social dispersion in its short life. Thirty years ago, you couldn’t just click a few buttons or have notifications automatically sent to you from a breaking news event in across the world.

In most households across America, the chances of finding multiple electronic devices in every room is pretty high. Every year ecofriendly appliances like air conditioners, refrigerators, washing machines, and light bulbs steadily become more resourceful and reliable as producers compete for business. With the promises of cutting electric bills in half and doing your part by saving the environment, what’s your reason not to upgrade?

Technology continues to improve every day because this is what we have come to expect. Imagine for one second that a newer, faster, slimmer model of our favorite gadget didn’t exist. We would most likely become frustrated and look for the next company that can deliver it. We have technology in our homes, our cars, our schools, and our jobs. There is no doubt that we are connected by it. In fact, we dependent on it.

Disposing of Obsolete Technology

So now ask yourself, what exactly are you going to do with that old laptop, desktop, tablet, or phone when its no longer the hottest thing on the market? After you go out and spend hard earned money on the latest and greatest, what are you going to do with your obsolete gadgets? You’d be foolish to just throw them in the dumpster and not try to get any money for them. Companies like DTC Computer Supplies are constantly looking to buy old, used, and obsolete tech equipment. Not only can they help you get cold hard cash for your electronics, but more importantly they keep the hazardous materials out of landfills. Since 1965, our parent company DTC Computer Supplies has been specializing in IT asset disposal and recycling. From hard drives, storage media, and computer memory to full on desktop, lap tops, and servers; they got you covered. What are you waiting for? Give them a call today and see how much money you can get! It might even help you pay for the new gadget you just bought!dtc logo

Evolution of the Data Center

0 Comments

The definition of a data center is a large group of networked computer servers typically used by organizations for the remote storage, processing, or distribution of large amounts of data. Not too long ago, the datacenter was the main aspect of any IT structure. Although data centers may still be essential to various IT procedures and their responsibility remains the same, the evolution is something to behold.

The Rise of Computerscomputer evolution

Personal computers were introduced to the world in 1981, leading to a rise in the microcomputing industry. In the early 1990s microcomputers began filling old mainframe computer rooms as servers. The server housings quickly became known as data centers. Before you knew it, businesses started building series of servers within their own facilities.

The .com Boom

By the mid-90s, the “.com boom” as we all know it, instigated companies into want faster internet connectivity speeds and around the clock operations. This surge in internet necessities resulted in construction of server rooms consisting of hundreds of thousands of servers. By this time, the data center as a service model had become popular.

Cloud Servicesinternet

It was until the turn of the millennium when cloud services came into the picture. Cloud storage is a cloud computing model in which data is stored on remote servers from the internet. From 2002-2006, Amazon Web Services went from development of cloud based services to offering IT infrastructure services. The Amazon infrastructure services included data storage, computation, and minor human intelligence through “Amazon MTurk”.

With the quick spread of cloud services in the past few decades, the data center is not so much about metal server rooms, but more about strategic assets. In some cases, businesses IT infrastructures are not equipped for cloud services or contain explicit compliance needs that require a closer eye.

Evolution and Upgrading IT Servicescloud servers evolution

As the cloud transition ensues, there are two thought-provoking actions that are taking place. First, businesses will be getting rid of data center assets long before their useful life has ended; giving others an opportunity to find higher end servers and storage devices at more affordable prices.

Second, as physical data centers adapt to the ever-changing organizations, the server rooms of smaller companies will need to keep up with the newer equipment available to them.

Since 1965, We Buy Used IT Equipment has been helping organizations from healthcare, government, and educational institutes to small and large businesses alike. Making the transition from old to new data center services can be overwhelming, so let us make it easy on you.

We Buy Used IT Equipment has been both saving the environment and companies money, by setting the standard for secure handling and re purposing of used IT assets for over half a century. Our spotless reputation ensures your transactions are handled efficiently, ethically, and securely.  With thousands of transactions processed, we have never had one security breach or data loss. Contact one of our friendly IT product experts today for a fast and fair quote on your used assets.